↓Skip to main content

Banana Pi Introduces BPI-CM6 Compute Module Featuring SpacemiT K1 RISC-V Processor for Embedded Applications

News Single-Board Computer Banana Pi RISC-V SpacemiT Homelab Make

Banana Pi has unveiled the BPI-CM6, a new compute module that offers a compact solution for embedded applications. Measuring 55 x 40 mm, the BPI-CM6 is designed to be compatible with existing Raspberry Pi CM4 carrier boards, utilizing the same board-to-board connectors.

Unlike its Raspberry Pi counterpart, the BPI-CM6 is powered by a SpacemiT K1 octa-core RISC-V processor. This processor features eight 64-bit CPU cores with the RVA22 profile, Imagination BXE-2-32 graphics, and an AI accelerator capable of delivering up to 2 TOPS of performance for on-device AI tasks.

While the BPI-CM6’s performance is comparable to that of an ARM Cortex-A55 processor, it has been shown to run Ubuntu Linux and handle basic AI functionalities effectively. The module is equipped with 8 GB of LPDDR4 memory and 16 GB of eMMC storage, with the potential for higher RAM configurations in the future.

To leverage the BPI-CM6’s capabilities, users can connect it to a carrier board via two 100-pin connectors. This allows access to various features, including:

  • 1 x 5-lane PCIe 2.1 expansion
  • 1 x RTL8211F PHY Ethernet controller
  • 1 x HDMI 1.4 interface
  • 1 x USB 3.0 interface
  • 2 x USB 2.0 interfaces
  • 1 x MIPI-DSI display interface
  • 3 x MIPI-CSI camera interfaces
  • 10 x UART serial interfaces

Banana Pi plans to release its own carrier board, which will include two M.2 M-Key connectors, dual Ethernet jacks, HDMI, USB Type-A and Type-C ports, a power input, microSD card reader, MIPI-DSI and MIPI-CSI connectors, as well as an RGB LED status light.

Details regarding pricing and availability have yet to be announced. For further information, interested parties can check the official Banana Pi Forum and the LinuxGizmos article.

Source: Liliputing.

↑